kvik @kvik@mastodon.sdf.org

There were some peculiarities with setting up 9front on the Raspberry Pi, which were not covered in the (otherwise great) 9front FQAs, so I wrote up my notes in setting up on a Pi 3 B+.

http://nf.wh3rd.net/plan9/9front-raspi3.txt

Let me know if there are any mistakes or misconceptions there, I'm still feeling my way around here.

#plan9 #raspberrypi

A Pail of Air

http://www.gutenberg.org/files/51461/51461-h/51461-h.htm

If your program uses Rust, that is an implementation detail, not your flagship feature

@nf 9front. I chose it because 9front seems to have the most active (and count) devs!

@nf use 9front, it's the most up to date distro

@nf use 9front, will save you ton of time :)

I was getting some issues with my thinkpad middle button and drawterm. Turns out it can be fixed in sway config https://makerdon.org/@nocko/104492157322589780
Should be applicable to X11 too with xinput magic.
Thanks to the magnificent grid people for the troubleshoot!

cc. @solderpunk