@Ricardus I completely agree, although I tend to think of triangle as a pain in the butt because of the scarcity of bits. Pozi-Driv can be driven by either a Phillips bit _or_ a square drive bit, but it drives flawlessly with high torque with an actual pozi-driv bit.
@Ricardus agreed, although I think the important geometry is the engagement surfaces more so than the overall external profile.
@elb Any bit that's conical in shape requires actual force to hold the bit into the fastener. Things like torx and Allen don't require that pressure for engagement.
@Ricardus That's true if the drive surfaces are an incline (like Philips) but not true if they are parallel (like pozi-driv or ... whatever that Japanese bit is that looks just like Philips but isn't). They're both conical in external profile, but the engagement surfaces meet at nearly a 90 degree angle, so they sit tight in their sockets.
Philips was literally _designed_ to torque out, and for some reason we use it for fasteners with moderate (though thankfully not usually high) torque loads.
@Ricardus See also hollow-ground flat blade screw drivers with parallel surfaces at the tip, versus your typical hardware-store flat blade with bevels.
"I appreciate SDF but it's a general-purpose server and the name doesn't make it obvious that it's about art." - Eugen Rochko